Customize 10 hp VFD with single phase 220v-240v input, this 10hp VFD can be used as a phase converter to convert 1-phase to 3-phase to drive three phase AC motors.
Free shipping
Delivery date: 6 - 12 Days
$1,109.98
$992.32
Customize made 10 hp variable frequency drive, 1-phase 220v-240v input, 3-phase output, it can be considered as a phase converter.
Specification:
| Basics |
Model |
GK3000-2S0075G |
| Capacity |
10 hp (7.5 kW) |
| Shipping weight |
18 kg |
| Dimension |
423*258*230 mm |
| I/O Feature |
Rated current |
32 A |
| Input voltage |
1 phase 220V /230V /240V AC |
| Input frequency |
50Hz/60Hz |
| Output voltage |
3 phase AC 0~input voltage |
| Output frequency |
0.00~400.00Hz |
| Over load capacity |
150% of rated current for 1 minute, 180% of rated current for 3 seconds |
| Control Feature |
Control mode |
V/F control;
Sensorless vector control; |
| Communication |
RS485 |
| Speed regulation |
1:100 |
| Start torque |
150% of rating torque at 1 Hz |
| Speed control accuracy |
≤±0.5% of rating synchronous speed |
| Frequency precision |
Digital setting: max frequency x± 0.01%;
Analog setting: max frequency x± 0.2% |
| Frequency resolution |
Analog setting: 0.1% of max frequency;
Digital setting: 0.01Hz |
| Torque boost |
Automatic torque boost, manual torque boost 0.1%~30.0% |
| Interior PID controller |
Be convenient to make closed-loop system |
| Automatic energy save running |
Optimize V/F curve automatically based on the load to realize power save running |
| Automatic voltage regulation (AVR) |
Can keep constant output voltage when power source voltage varies. |
| Automatic current limiting |
Limit running current automatically to avoid frequent over-current which will cause trip |
| Environment |
Enclosure rating |
IP 20 |
| Temperature |
–10℃~ +40℃; VFD will be derated if ambient temperature exceed 40℃; each rise 1℃, the derate will be 5% |
| Humidity |
5%-95%, without condensation |
| Altitude |
≤1000m; VFD will be derated if above 1000m |
| Impingement and oscillation |
Normal running:<5.9m/s2 (0.6g); Transportation:<15m/s2 (1.5g) |
| Store environment |
–20℃~ +60℃; no dust, no corrosive gas, no direct sunlight |
Tips: Can a 3 phase motor run on single phase power supply?
There is static phase converter that can provide a simulated three phase from single phase power supply, there is also rotary phase converter can do the job, the rotary solution seeming to be more reliable than static phase converter. Possibly the best way is to supply a Variable Frequency Drive (VFD), if you go with a VFD then you typically need to upsize the VFD (example a 10 hp VFD for a 7.5 hp application), this is because the input devices will be sized for 3 phase, and you will need 2 of them to carry 1.73 (square root of 3) more current, and your trough in the uncorrected resulting wave form will be deeper so you will need upsize the capacitance in the filter to fill this trough in.
Existing reviews
The 10 HP VFD converter was the perfect solution to my workshop's equipment going from single-phase input to three-phase output, running at low noise and exceeding expectations.
By
Thalion
on 15/01, 2025
Was this review helpful?
Yes /
No
(0/0)
Intuitive Interface and Real-Time Monitoring
One of the standout features is the user-friendly interface, making it easy to adjust settings and monitor the motor's performance. The digital display provides real-time information, which helps in fine-tuning motor speed and ensuring smooth operation. The VFD’s ability to convert from single-phase to three-phase has been invaluable, particularly for applications where three-phase power is unavailable, like in my workshop.
By
Sierra
on 25/09, 2024
Was this review helpful?
Yes /
No
(0/0)
Once everything was set up, the VFD performed remarkably well. It provides a smooth and consistent output, converting the single-phase power to three-phase seamlessly. My 10 hp motor, which powers a heavy-duty lathe, runs as smoothly as if it were connected directly to a three-phase power source. The VFD also offers precise speed control, allowing me to adjust the motor speed to match the specific requirements of my projects.
By
Isabella
on 29/08, 2024
Was this review helpful?
Yes /
No
(0/0)
Some of my old equipment would run into voltage issues, but after using this VFD, they’re back to running at full capacity. It works great, and there’s no noticeable heat or noise issues either.
By
Dante
on 20/08, 2024
Was this review helpful?
Yes /
No
(0/0)
Ah, finally find a VFD with single phase input up to 10hp, I can use it to convert my single phase power supply to drive my three phase motor now.
By
Michael
on 14/09, 2017
Was this review helpful?
Yes /
No
(1/0)
