10 kVA three phase 220V/380V frequency converter, easy converting 50Hz to 60Hz or 60Hz to 50Hz for three phase industrial motor machines with pure sine wave, also can change 220V to 380V/400V.
Delivery date: 6 - 12 Days
-
-
-
-
-
-
$6,499.00
$5,990.77
10 kVA three phase solid state frequency converter, easy converting fixed frequency to variable frequency for powering & testing industrial machines with pure sine wave, also can change three phase 220V to 380V/400V in one step.
Specification
| Model |
HZ-50-3310 |
| Capacity |
10 kVA |
| Dimension |
770*580*1140mm |
| Weight |
150kg |
| Input |
Voltage |
3 Phase 4 Wire: Wye Type 190/110, 200/115, 208/120, 220/128, 230/132, 240/139V ±10% (option *) |
| 3 Phase 4 Wire: Wye Type 380/220, 400/230, 415/240, 440/254, 460/265, 480/277V ± 10% (option *) |
| 3 Phase 4 Wire: Della Type 220, 230, 240, 380, 400, 415, 440V ± 10% (option *) |
| Frequency |
50 Hz, 60 Hz or 400 Hz ± 5% |
| Output |
Voltage, current |
110V Setting (Low grade): 0-150V (phase voltage), 0-260V (line voltage) 27.6A |
| 220V Setting (High grade): 0-300V (phase voltage), 0-520V (line voltage) 13.8A |
| Load stabilization Rate |
≤±1% |
| Frequency |
50Hz, 60Hz up to 400Hz adjustable
Note:
-When the output is 400Hz, the load capacity can only reach 50% of the rated capacity.
-When the output is ≤120Hz, the load capacity can reach 100% of the rated value.
-You can just adjust converter output frequency in the range (40-400Hz) for 400Hz option. |
| Frequency Stability |
≤±0.01% |
| Harmonic Distortion |
Pure Sine Wave ≤2% |
| Frequency meter |
4 digit, digital frequency meter, resolution 0.1Hz/Step |
| Voltmeter |
4 digit, digital voltage meter, resolution 0.1V |
| Ammeter |
4 digit, digital ammeter, resolution 0.1A |
| Watt meter |
4 digit, digital Watt meter, resolution 0.1W |
| Protection |
With overload, short circuit, over temperature |
| Instantaneous power failure protection and alarm device |
| Working Environment |
Temperature |
0 - 40 deg.℃ |
| Humidity |
0 - 90% (Non condensation) |
| Warranty |
18 months |
* The input voltage is factory selected.
Tips: Can a 60Hz motor run on 50Hz power supply?
The motors can run at any frequency starting a few Hz until over frequency (a realistic one), the variable frequency drive can do that, as you know. But the motor has to be cooled, ventilated by attached coolers /ventilators. There are a lot of applications when the motors are run at frequency between 10 Hz and 60 Hz (with variable frequency drives) long periods without problems. Main condition is to be cooled! Instead, the very low frequency (for example around 5 Hz) its more difficult because you have to inject a higher current and could become dangerous, so it can be done but not for a long period.
Existing reviews
Will this frequency converter work or is there a better unit to use?
Yes, it works, based on your specs, recommended frequency converter model: HZ-50-3130, 30kVA power capacity, input: 3ph, Wye (L1,L2,L3 + N,G), 480V (+/- 10%), 50/60Hz and output: 1ph, (L + N,G), adjustable (0-300V), adjustable (40-120Hz), 125A.
By
GoHz.com
on 12/08, 2024
Was this review helpful?
Yes /
No
(0/0)
Will this frequency converter work or is there a better unit to use?
I need to go 480/3Phase/60Hz to 230VAC/1 Phase/60Hz @30A. 15kVA max. Application is for a microwave generator. Will this frequency converter work or is there a better unit to use?
By
Kimberly
on 12/08, 2024
Was this review helpful?
Yes /
No
(0/0)
Respond: Is it possible to phase synchronize?
Synchronization is not possible, but you can use one large converter capacity To handle several 10kVA loads,our converter output is hard wire "free terminals" , you can connect any number of loads..
By
GoHz.com
on 29/07, 2024
Was this review helpful?
Yes /
No
(0/0)
Is it possible to phase synchronize?
I am looking into powering several 10kVA loads in a complex system using your converters. Is there a way to phase-synchronize your converters?
System will be 480 VAC 60 Hz 3 phase in, 400 VAC 50 Hz 3 phase out.
By
Richard
on 29/07, 2024
Was this review helpful?
Yes /
No
(0/0)
Can the device we purchased be connected to an input voltage of 208V/60Hz?
No, it can Not be. The converter input is a factory selected option with atolerance of +/- 10%.
By
GoHz.com
on 17/07, 2024
Was this review helpful?
Yes /
No
(0/0)
Can the device we purchased be connected to an input voltage of 208V/60Hz?
Can we connect input voltage of 208V/60Hz instead of 110V/60Hz to the units we purchased?
By
geely
on 17/07, 2024
Was this review helpful?
Yes /
No
(0/0)
We have purchased two of these to run 400V 50Hz 3 phase European machines here in the states from our 240V 60Hz power. these have both arrived quickly and in perfect condition. Have been using these for over a year now without any issues.
I caused a few issues of my own but their engineer Sameh Gouda was very quick to help resolve my problems.
By
TROY
on 02/11, 2018
Was this review helpful?
Yes /
No
(0/0)
